666.00 Dollar US$ · Affordable Carbon SCARAB Vampire 12mm Airframe 175mm Core UAV Drone, HexiiCopter Kit

Published date: February 17, 2013 9:11 am

Location: 33 Doubleview Drive, Elanora, Queensland, AUSTRALIA

Affordable Carbon SCARAB Vampire 12mm Airframe 175mm Core UAV Drone, HexiiCopter Kit

The Carbon Vampire 175mm SCARAB 12mm is a large 700mm Hexii for Aerial Photography -requires assembly skills - has the Has the flight characteristic of a Quad - yet is smooth and light, thanks to a super strong CENTRAL CORE - with three decks - PARIS Sirius™ can be mounted on the mid-TOP-DECK - slender 12/10mm double thickness booms & light weight mounts have been designed to reduce airflow drag beingaerodynamically clean and efficient with low drag under the propeller wash zone. Scarab Vampire is set up as an H configuration where the side motors are NOT used for yaw - their function is to profit lift near the centre.  If you choose to run a WookongM do not select Hex - you must use a custom motor-mix - for PARIS Sirius™ we have written our own custom mix called H.  The booms can be rotated/offset by small increments to provide positive-offset-thrust lines rather than the poor yaw control associated with rectangular or flat boom frames. Can be upgraded to Octa at any time by adding 2 booms/motors/ESC and reprogramming the PARIS or WookongM - or a Octa 4X co-axial - or downgraded to a Quad - the Airframe has 8 boom mounting positions.

Scarab is promote up and coming young film makers who use our Multicopters to challenge the limits of the existing film industry - if you have talent and want support - send us your showreel

 

 

the above video shows both 170° ultra wide for FPV view (what the pilot sees)  & GoPro HD set to 127° which cuts out all props in view

 

 Features

• Handles like a Quad - fast and manoeuvrable yet smooth in roll - lifting power of a Hex - the H software is the key


• Optimised for AP/FPV - flat low profile design - the camera is counterbalanced by the LiPo in the rear tail


• SCARAB Vampire 175mm carbon core (This core has never been fractured in any crash recorded - never) - can be reconfigured to Quad ; Octa X ; Octa


• 700mm diameter between opposite engine centres


• Airframe 695 grams - excluding engines/electronics/LiPo cell


• FPV - APC Camera tray flight ready weight 1225grams (without LiPo and camera)


• Payload - 850grams including LiPo - If your running an APSC camera it is advised to run 10x5 props and a 4S4200 as well


• 4 x carbon Landing Gear 120mm clearnace to lower frame 


• Props 4S 16.8v 9050 Triples (included - see video above)


• alternate props are Graupner 10x5 (not included) or 11x5 Graupner(not included)


• Designed, developed & manufactured by us.  Not available on any other website.


• Requires high C rated Lipo Recommend 4S4200 45-90c ;  NOT INCLUDED

 

Visit Webpage

Price $666.00 USA,

approx AU $645.91

Watch Video

Multiwiicopter.com
33 Doubleview Drive 
Elanora 
Qld 4221 AUSTRALIA

• Telephone +61 7 5598 3999

• Fax +61 7 5598 3988

• Cell +61 418 983 999

Share